Badminton is an Olympic sport similar to tennis, but with a net and smaller rackets. It can be played on outdoor courts as well as indoor ones. The game requires certain skills that are learned via training and practice in order to advance past the beginner level, so it is important to take care of your court properly when you first create one or upgrade it later.
The “outdoor badminton court construction cost” is the price of building an outdoor badminton court. It can range from $1,000 to $10,000 depending on the size and location of your project.
We gave you a step-by-step instruction on how to build an indoor badminton court last week.
In this post, you’ll learn how to construct an outdoor badminton court.
This article is for you if you have enough room in your backyard or elsewhere to devote to a full-size badminton court and are looking for a step-by-step guide on creating an outdoor badminton court.
Let’s get started:
Contents
Step 1: Gather your materials
Here are the items you’ll require:
- Net for badminton
- 100-foot tape measure
- Hand maul or hammer
- Duct tape, spray paint, or chalk
- Grassmower (optional)
- Lighting
Step 2: Choose a location.
When choosing a site for an outdoor badminton court, there are three factors to consider:
Climate is favorable
Here’s what I mean when I say that you need a Climate is favorable for an outdoor badminton court:
- Outside, it shouldn’t constantly be windy. Windy conditions are unavoidable on some days of the year. If the wind seldom stops blowing where you live, an indoor court could be a better option.
- Most days, the humidity level shouldn’t be too high. Humid air impacts the shuttle’s speed and, as a result, the game’s flow. As a general rule, a badminton court should be built as far away from a body of water as practicable.
Size is appropriate
A full-size badminton court is 44 feet long and 20 feet broad, although it does not contain side galleries.
The location where the court will be built should be at least 55.8ft long and 26.4ft wide to allow for walking side galleries (which are necessary for easy mobility across the court and in/out of the court area).
Plain Terrain
A rough or uneven surface will make it difficult to move about during the games, increasing the chance of injury.
If the terrain is uneven, the topsoil may need to be removed and replaced (a costly endeavor but one that is needed to have a playable court).
3. Prepare the Ground
Any impediments, tree stumps, rocks, or other anything that can interfere with games should be removed from the area where the court will be built.
If there is grass in the vicinity, mow it to a height of approximately 2 inches using a lawnmower.
Finally, use a garden hose to irrigate the area. This is necessary to allow the dust to settle before proceeding to the next step.
Step 4: Make Corner Marks
Mark the four corners of the court with skates, forming a rectangle 44 feet long and 22 feet wide (the size of the court).
After you’ve finished marking the corners, you should have two equal-sized squares (boxes).
Tip: Measure diagonally between opposing corners to ensure that the squares are the same size. If the two squares are the same size, the two measures will be the same as well.
Step 5: Draw a perimeter around the court.
Run a thread around all four skates to form the court’s perimeter; this will define the backline for doubles games and back boundary for singles and doubles games.
Spray-paint the boundary lines on top of the taut string line on the ground. The string line will aid in the creation of perfectly straight lines.
Step 6: Draw Lines and Boundaries
The borders may be drawn in the following order:
- Draw the outermost lines first if you haven’t previously done so in the previous stage. They are 44 feet long and 20 feet broad (wide).
- Inside the outside lines, draw “Sidelines,” which are lines that run the length of the court.
- Make “Front Service Lines” on both sides of the net, which are horizontal lines directly in front of the court.
- “Back Service Lines” should be drawn. They are drawn close to the boundary lines and are also horizontal to the net.
- To split the court in half, draw a line. This queue should start at the far end and conclude at the front service counter. Ensure that this line is drawn on both sides of the court.
Step 7: Connect to the Internet
Standard Net for badmintons are 5’1″ at the edges and sag slightly at the center, dropping to a height of 5′. Here’s how you can set up a Net for badminton:
1. Put the poles together.
Different poles are included with different nets. Let’s take a look at some of the most frequent sorts of pole configurations and how to install them:
Bottom Poles (a)
The net stand may be adjusted on both sides thanks to the bottom poles. You just need to shove one of them into the other.
To put together a net that comes with bottom poles, go to one side and push one of the poles into the other before putting the T-shaped foot on it.
To build the net stand on the opposite side, follow the same steps.
b) Two Positions
Start by pushing one pole into another and placing a stake into the ground if your net didn’t arrive with poles and just has two supports.
Pull the net tight and measure the distance between the first and second poles before deciding where to place the second pole. Place the second pole in the ground according to your estimations.
2. Set up the internet
Begin by connecting the upper section of the net to the pole’s top, then the lower section to the pole’s bottom.
It’s time to shift to the opposite side once you’ve tied up the net on one side.
Step 8: Install Lighting
On the badminton court, the illumination should satisfy two criteria:
- It should be bright enough to light up the whole room.
- It should be light enough for spectators (and even players) to see everything going on in the stadium.
As a general rule, two 150W lights set on each sides of the net will be sufficient to illuminate your outdoor badminton court.
You may skip this step if you’ll only be using the badminton court during the day and there’s adequate natural light.
FAQs
What is the Size of a Badminton Court?
The dimensions of a conventional badminton court, without the galleries, are 44 feet by 20 feet.
What Does It Cost to Construct a Badminton Court?
An outdoor badminton court may cost anything from $5,000 to well over $10,000 to construct. Because the final pricing is determined by the kind of material and supplies you want to use, the range is so wide.
How do you mark out a grass badminton court?
A badminton court may be marked out on grass using spray paint, chalk, or even duct tape. Spray paint is the simplest to use and will take the longest to fade or vanish of all of these possibilities.
How long does a badminton court last?
A basic badminton court is 44 feet in length.
What is the size of a badminton court?
A conventional badminton court is 20 feet long and 20 feet broad.
What is the minimum size of a badminton court?
A badminton court needs a 55.8ft long and 26.4ft broad space when the side gallery is included.
What is the size of a singles badminton court?
The dimensions of a badminton court in a singles match are 44 feet by 17 feet.
Conclusion
There are few things better than smashing the shuttlecock on your own badminton court on weekends and whatever spare time you have during the week.
I’d want to hear from you now:
- How long have you been a badminton player?
- Do you like to play badminton indoors or outside?
- Do you have a question about the court’s formation?
Please feel free to contact me in the comments box below; I’d be happy to answer your questions and hear your thoughts. @healthyprinciples_ is our Instagram handle.
Building an outdoor badminton court is a great way to enjoy the outdoors. The “how to make badminton court with cardboard” is a simple and cheap way to build one.
Related Tags
- outdoor badminton courts near me
- how to make badminton court flooring
- how to make badminton court on grass
- how to make badminton court lines
- outdoor badminton court size in feet
